Javascript is disabled on your browser and this site won't work properly without Javascript enabled.
TP6 | C-Con
(972) 726-7002
Dallas, Texas

                    TP6 Touch Probe

             

About the TP6 & TP6A

The TP6 and TP6A probes have different probe mount options (M8 thread and Autojoint respectively). Both probes are kinematic touch-trigger probes and have manually adjustable trigger force for optimum probe performance with different stylus configurations.

The TP6 is 25mm in diameter and can carry long styli (M3 range), providing substantial overtravel for excellent robustness.  This ideally suited to manual machines.

Specification summary

TP6

TP6A

Principal application

Robust universal DCC and manual CMMs.

As TP6 but with fast probe exchange without requalification.

Sense directions

5-axis: ±X, ±Y, +Z 

5-axis: ±X, ±Y, +Z

Unidirectional repeatability maximum (2s µm) (at stylus tip)

0.35 µm (0.000014 in)

0.35 µm (0.000014 in)

Pre-travel variation 360° (XY plane)

±1 µm (±0.00004 in)

±1 µm (±0.00004 in)

Weight

56 g (1.98 oz)

76 g (2.68 oz)

Stylus range

M3

M3

Stylus force range (adjustable)

0.11 N - 0.3 N

0.11 N - 0.3 N

Stylus force (set by Renishaw)

0.11 N - 0.13 N

0.11 N - 0.13 N

Stylus overtravel (typical)

XY plane:  ±22°

+Z axis:  5.5 mm (0.22 in) at 0.11 N
2 mm (0.08 in) at 0.3 N

XY plane:  ±22°

+Z axis:  5.5 mm (0.22 in) at 0.11 N
2 mm (0.08 in) at 0.3 N

Maximum extension on PH10 series

200 mm (7.87 in)

200 mm (7.87 in)

Mounting method

M8 thread

Autojoint

Suitable interface

PI 4-2, PI 7-2, PI 200, UCC

PI 4-2, PI 7-2, PI 200, UCC

.

                               

 

                                                                                               



C-CON is committed to exceeding customers expectations through experience and dedication.
Sitemap | Stay Connected : youtube
© Copyright 2018, C-CON, INC. All Rights Reserved.